Torque Converter Seal Driver V6 / L4 Honda & Acura Transmissions - 3D Printed Tools

Product Details

Torque Converter Seal Driver – Honda & Acura
This torque converter seal driver is designed to accurately install torque converter seals on a wide range of Honda and Acura transmissions, seating the seal to the correct depth every time.

• Fitment: Compatible with most Honda and Acura transmissions.
  Not compatible with newer CVT or 9-speed / 10-speed transmissions.

• Proven Design: Tested on a large number of transmission with consistent results.

• Configuration: Includes three pieces—a main driver and two interchangeable attachments to accommodate varying seal sizes.

Recommended Use:
Test-fit the tool without the seal installed to confirm compatibility with the transmission before installation. The seal can be driven using the main driver alone or with one of the included attachments, depending on the application. While no incompatible transmissions have been encountered during testing (excluding CVT and 9/10-speed units), verifying fitment beforehand is strongly recommended.

For best results, use a rubber mallet when driving the seal.

Notes:

• These tools are fully 3D printed. Minor surface variations or small discrepancies in the print are normal due to the printing process and do not affect performance.

See the links below for additional torque converter seal drivers designed for other Honda and Acura transmission applications.

HCF-2 CVT Torque Converter Seal Driver

9 Speed Torque Converter Seal Driver

10 Speed Torque Converter Seal Driver